This connector is 2.5 mm pitch wire-to-board connector that has a mechanism to prevent an incomplete mating by utilizing the inertial force when mating connector. In all circuits of connector, controlled key for preventing mismatching of mating is added, and two type connectors can be used in the same model.
Product Profile
| Series | XNI connector |
| Category | Crimp Style Connectors (Wire-to-Board type) |
PC board
mounting | Through-hole |
Mating
direction | Top entry |
Array
(Insertion part) | Single-row |
| Lock | Secure lock (Inner), Secure lock (Center), Inertia lock |
Mating
assist | Keying |
| Standard | CSA, TÜV, UL |
Specification
| Pitch | 2.5mm |
| Circuit | 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 15 |
Current
rating | 3 A AC/DC (AWG #22) |
Voltage
rating | 250 V AC/DC |
Temperature
range | -25℃ to +85℃ |
Insulation
resistance | 1,000MΩ min. |
Withstanding
voltage | There shall be no breakdown or flashover while applying 1,000 VAC for one minute. |
Conductor
size | AWG #30,#28,#26,#24,#22
0.05mm2 to 0.33mm2 |
| Insulation O.D. | φ0.65mm to φ1.7mm |
[Notes]
"-" in the table: Indicates products not listed.
"+" in the table: Indicates products with additional specifications
(such as different materials, packaging, or key variations) for the representative specifications.
Please use the data for the representative specification with a different part number suffix
for the same number of circuits.
Blank cells:
Indicates products that are being prepared for listing.
* For any questions or requests, please contact JST.
Catalog
