It is time consuming to directly solder the many wires that are required on densely packed printed circuit boards. The SIN connector is crimped to a wire, inserted into a hole in a printed circuit board, then soldered. Solderability is enhanced because solder does not enter the wire, thus ensuring a safe and secure connection.This connector is ideal for permanent connection of jumper wires onto a printed circuit board or for connection to external circuits.
Product Profile
| Series | SIN connector |
| Category | Crimp Style Connectors (Wire-to-Board Board-in type) |
| Standard | CSA, UL |
Specification
| Circuit | 1 |
Temperature
range | -25 ℃ to +85 ℃ |
Conductor
size | AWG # 30 , # 28 , # 26 , # 24 , # 22 , # 20 , # 18 , # 16 , # 14 , # 12 , # 10
0.08 mm2 to 5.5 mm2 |
| Insulation O.D. | φ 0.8 mm to φ 4.9 mm |
[Notes]
"-" in the table: Indicates products not listed.
"+" in the table: Indicates products with additional specifications
(such as different materials, packaging, or key variations) for the representative specifications.
Please use the data for the representative specification with a different part number suffix
for the same number of circuits.
Blank cells:
Indicates products that are being prepared for listing.
* For any questions or requests, please contact JST.
Catalog
