The FM connector, a miniature connector with a thickness of only 3.0 mm, was developed to connect flexible flat cables (FFC) or flexible printed circuits (FPC) with a lead pitch of 1.0 mm to printed circuit boards. It is ideally suited for connections inside high-density equipment or between mechanical units. The contact is constructed to ensure a stable connection and high reliability even under vibration and impact. Connection is easy with a simple snap-in action.
Product Profile
| Series | FM connector |
| Category | FFC/FPC Connectors |
Applicable
FPC/FFC | FFC, FPC |
FPC/FFC
thickness | 0.33 mm |
ZIF
Non-ZIF | Non-ZIF |
PC board
mounting | Through-hole, SMT |
Mating
direction | Side entry, Top entry |
Contact
surface side | Both sides contact |
| Standard | CSA, UL |
Specification
| Pitch | 1mm |
| Circuit | 3, 4, 5, 6, 7, 8, 10, 11, 12 |
Current
rating | 0.5 A AC/DC |
Voltage
rating | 50 V AC/DC |
Temperature
range | -25℃ to +85℃ |
Insulation
resistance | 800MΩ min. |
Withstanding
voltage | There shall be no breakdown or flashover while applying 500 VAC for one minute. |
[Notes]
"-" in the table: Indicates products not listed.
"+" in the table: Indicates products with additional specifications
(such as different materials, packaging, or key variations) for the representative specifications.
Please use the data for the representative specification with a different part number suffix
for the same number of circuits.
Blank cells:
Indicates products that are being prepared for listing.
* For any questions or requests, please contact JST.
Catalog
