header
 |  Company Profile |  J.S.T. Network |  J.S.T. Other Websites |  Products Precautions |  Shopping Site |  HOME | 
HOME > Product Profile
FLT connector
*Top entry type
*The housing is made of heat resistant plastic to allow reflow soldering.
*Staggered surface mount tails
*Low insertion force with staggered mating points design
Product Profile
SeriesFLT connector
CategoryFFC/FPC Connectors
Applicable
FPC/FFC		FPC
FPC/FFC
thickness		0.3 mm
ZIF
Non-ZIF		Non-ZIF
PC board
mounting		SMT
Mating
direction		Top entry
StandardUL
Specification
Pitch0.5mm
Circuit6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30,
32, 40
Current
rating		0.5 A AC/DC
Voltage
rating		50 V AC/DC
Temperature
range		-25℃ to +85℃
Insulation
resistance		500MΩ min.
Withstanding
voltage		There shall be no breakdown or flashover while applying 200 VAC for one minute.
Catalog Catalog Manual Manual
Shopping Site FLT connector FLT connector

3D/2D Data
ProductIGESSTEP3D-PDF2D-PDF
106FLT-SM2-TBDownloadDownloadDownloadDownload
208FLT-SM2-TBDownloadDownloadDownloadDownload
310FLT-SM2-TBDownloadDownloadDownloadDownload
412FLT-SM2-TBDownloadDownloadDownloadDownload
514FLT-SM2-TBDownloadDownloadDownloadDownload
616FLT-SM2-TBDownloadDownloadDownloadDownload
718FLT-SM2-TBDownloadDownloadDownloadDownload
820FLT-SM2-TBDownloadDownloadDownloadDownload
922FLT-SM2-TBDownloadDownloadDownloadDownload
1024FLT-SM2-TBDownloadDownloadDownloadDownload
1126FLT-SM2-TBDownloadDownloadDownloadDownload
1228FLT-SM2-TBDownloadDownloadDownloadDownload
1330FLT-SM2-TBDownloadDownloadDownloadDownload
1432FLT-SM2-TBDownloadDownloadDownloadDownload
1540FLT-SM2-TBDownloadDownloadDownloadDownload
[Notes]
"-"  in the table: Indicates products not listed.
"+" in the table: Indicates products with additional specifications
(such as different materials, packaging, or key variations) for the representative specifications.
Please use the data for the representative specification with a different part number suffix
for the same number of circuits.
Blank cells: Indicates products that are being prepared for listing.
* For any questions or requests, please contact JST.