The RE connector is a highly reliable, low-cost, crimp style connector offered in wire-to-board configuration. It was developed for internal wiring in office automation (OA) equipment, including personal computers, office computers, computer peripherals as well as servers for computer networking. This connector is also suitable for various precision electronic equipment.
Product Profile
| Series | RE connector (Gold-plated) |
| Category | Crimp Style Connectors (Wire-to-Board type) |
PC board
mounting | Through-hole |
Mating
direction | Side entry, Top entry |
Array
(Insertion part) | Single-row |
| Standard | CSA, UL |
Specification
| Pitch | 2.54mm |
| Circuit | 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 14, 16, 30 |
Current
rating | 2 A AC/DC (AWG #24) |
Voltage
rating | 250 V AC/DC |
Temperature
range | -55℃ to +105℃ |
Insulation
resistance | 1,000MΩ min. |
Withstanding
voltage | There shall be no breakdown or flashover while applying 1,500 VAC for one minute. |
Conductor
size | AWG #30,#28,#26,#24
0.05mm2 to 0.22mm2 |
| Insulation O.D. | φ0.9mm to φ1.5mm |
[Notes]
"-" in the table: Indicates products not listed.
"+" in the table: Indicates products with additional specifications
(such as different materials, packaging, or key variations) for the representative specifications.
Please use the data for the representative specification with a different part number suffix
for the same number of circuits.
Blank cells:
Indicates products that are being prepared for listing.
* For any questions or requests, please contact JST.
Catalog
