This 2.5 mm pitch connector is used to interconnect printed circuit boards. It easily resists distortion during mating, thus ensuring reliable contact, even under adverse conditions.
Product Profile
| Series | JQ connector |
| Category | Board-to-Board Connectors |
Connecting
style | Vertical, Horizontal, Parallel |
PC board
mounting | Through-hole |
| Lock | Friction lock |
| Standard | CSA, TÜV, UL |
| Others | Radial taping |
Specification
| Pitch | 2.5mm |
| Circuit | 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 |
Current
rating | 3 A AC/DC |
Voltage
rating | 250 V AC/DC |
Temperature
range | -25℃ to +85℃ |
Insulation
resistance | 1,000MΩ min. |
Withstanding
voltage | There shall be no breakdown or flashover while applying 1,000 VAC for one minute. |
| Remarks | Compatible Crinp-style / IDC-style connectors available (XH/NR connector, etc.) |
[Notes]
"-" in the table: Indicates products not listed.
"+" in the table: Indicates products with additional specifications
(such as different materials, packaging, or key variations) for the representative specifications.
Please use the data for the representative specification with a different part number suffix
for the same number of circuits.
Blank cells:
Indicates products that are being prepared for listing.
* For any questions or requests, please contact JST.
Catalog
