This is a 3.0 mm pitch SMT connector for secondary power supply with current carrying capacity of 7A using AWG#18.
・Double row
・Space for suction is ensured on the top side of the connector for the pick and place machine nozzle without the need for suction tape.
・Two types of keying available (Type A and Type B) for both 4 and 6 circuits.
・Inertial lock mechanism

Available in various fields as a MU (multi-use) connector with a mix of automotive and consumer characteristics.

Unsealed hybrid connector using 0.64 terminal and 2.8 terminal for automotive applications.

ASU is a compact, high-speed transmission connector ideal for in-vehicle equipment such as Electronic Toll Collection Systems (ETC), navigation systems and Human Machine Interface (HMI).
Designed for SMT termination.

ASU is a compact, high-speed transmission connector ideal for in-vehicle equipment such as Electronic Toll Collection Systems (ETC), navigation systems and Human Machine Interface (HMI).

This UBC series is a waterproof type interface connector with an IPX8 (Submerged in 2 meters of water for up to 60 minutes) rating for ingress protection per JIS C 9020 Protection Grade8.
Reversible structure that can be inserted regardless of front or back orientation of the plug, and power supply up to maximum of 100W.
The receptacle is USB3.2 compliant with a data transmission rate of up to 20 Gbps.
・ Waterproof type
・ Mating cycles: 10,000
・ Space-saving inner housing design
・ Dual row SMT solder tails
・ Halogen free

JFA-VL is a highly integrated connector system for electrical circuitry. It is designed for signal and power supply applications for use in factory automation, heavy electricmachinery, railway and general industrial equipment.
There are three types of 5.6mm, 6.5mm and 6.7mm pitches.

The AYU2T is a compact, coaxial connector commonly used in antenna modules for high frequency bands up to 20 GHz.

The UBC connector is an USB Type-C compliant interface connector capable of supplying up to 100W of power.
The receptacle is a 16-pin design capable of transmitting data at speeds of up to 480 Mbps.
Symmetrical plug design, allowing the cable to be inserted in both top and bottom orientations.

Developed in pursuit of withstanding high voltage,miniaturization and low profile as surface mounting type connector for automotive.To realize the withstanding voltage and miniaturization by flange structure and pitch 3.5mm design.

Developed in pursuit of miniaturization and water-proof as surface mounting type connector for automotive.To realize miniaturization and high reliability with the 0.50 terminal and CPA design.

Production switching of products non-compliant with RoHS 2 will be postponed from the initial March 2019 to July 2019.

Our Connectors/Terminals except for the following products are conformed to RoHS2. The following products shall be also shifted one by one to the RoHS2 Compliance product by the end of March in 2019. In addition, “Compliant with RoHS” is described on the each product catalog, the description will be sequentially changed to the “RoHS2 compliance”.